C&K systems SYS3316RF Installation Instructions Manual page 10

SYS3316RF Installation Manual
Command Location 0B: Communications Control Command Location 0B: Communications Control Command Location 0B: Communications Control
Command Location 0B: Communications Control Command Location 0B: Communications Control
Default Values Default Values Default Values
Default Values Default Values
Digit Position (1): Delay Before Dial Time
0 = 0 secs 4 = 40 secs
1 = 10 secs 5 = 50 secs
2 = 20 secs 6 = 60 secs
3 = 30 secs 7 = 70 secs
Digit Position (2): Dial Type
1 = DTMF - Touch Tone (10/sec)
2 = DTMF (5/sec)
3 = Pulse (10/sec)
Digit Position (3): Enable Keypad Activated RPS
0 = No
1 = Yes; allows remote programming to start from on-site keypad command
Digit Position (4): RPS Enable
0 = No
1 = Yes; allows remote programming to start from off-premise location
Digit Position (5): Phone Ring Type
0 = Single ring; uniformly timed rings with long pauses between rings
1 = Double ring; rings twice quickly followed by a long pause then rings twice again
Digit Position (6): Dialing Attempts
1 = 1 try 5 = 5 tries
2 = 2 tries
6 = 6 tries
3 = 3 tries 7 = 7 tries
4 = 4 tries
8 = 8 tries
Command Location 0C: Account Number 1 Command Location 0C: Account Number 1 Command Location 0C: Account Number 1
Command Location 0C: Account Number 1 Command Location 0C: Account Number 1
Account Number 1 is used in
conjunction with Receiver Number 1
Digit Positions (1) - (6): Account Number
Valid entries are 0 - F.
The Account Number is right justified. The last digit must be in Position (6).
The SYS3316RF will read the account number using:
Digit Positions (4) - (6) with 3-digit accounts
Digit Positions (3) - (6) with 4-digit accounts
Digit Positions (1) - (6) with 6-digit accounts
Fill all unused Digit Positions with 0's.
8 = 80 secs 2 = 120 secs
9 = 90 secs 3 = 130 secs
0 = 100 secs 4 = 140 secs
1 = 110 secs 5 = 150 secs
9 = 9 tries 3 = 13 tries
0 = 10 tries 4 = 14 tries
1 = 11 tries 5 = 15 tries
2 = 12 tries
Default Values Default Values
Default Values Default Values Default Values
0 3
0 0 0 0 0 B B B B B
(1) (2)
0 0
0 0 0 0 0 C C C C C
(1) (2)
Hexadecimal Value Hexadecimal Value Hexadecimal Value Hexadecimal Value Hexadecimal Value
10 10 10 10 10
CL 0B and 0C CL 0B and 0C CL 0B and 0C
CL 0B and 0C CL 0B and 0C
1 1 0 8
(3) (4) (5) (6)
0 0 0 0
(3) (4) (5) (6)
PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS
Key Strokes Key Strokes Key Strokes
Key Strokes Key Strokes
A
B
C
D
E
F
#
#
0
1
2
3
4
5