Use a product specifically manufactured for leak detection. Leak ArtNo.272-0025 - 90 Aga Professional - Control panel removal testing of the appliance shall be conducted in accordance to the manufacturer’s instructions.
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 3. Remove a Side Panel Fig.4 Disconnect from electricity supply Remove control panel (see ‘1. Remove Control Panel’). Pull the cooker forward.
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 8. Remove an Oven Door Fig.5 To remove the door, open the door fully. Swivel the locking ‘U’ clips forward to the locking position (Fig.5).
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 14. Replace an Oven Fan Fig.9 Disconnect from electricity supply Pull the unit forward to access the cover boxes at the rear of the appliance.
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. Circuit Diagram A2/B1 B2 Code Description Code Description Code Color Multi-function oven master switch Oven protect thermostat Blue Multi-function oven drone switch...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. Technical Data INSTALLER: Please leave these instructions with the user. RATING PLATE LOCATION: Inside base drawer of cavity. Remove the drawer (see ‘Overview’...
Page 12
AGA Marvel 1260 E. VanDeinse St. Greenville, MI 48838 Business (616) 754-5601 Fax: (616) 754-9690 Toll Free Telephone 800-223-3900 www.agamarvel.com...
Need help?
Do you have a question about the Professional 90 and is the answer not in the manual?
Questions and answers