Panasonic AJ-HD150P Operating Instructions Manual page 75

Setup menus
USER menu
<OPERATION>
No.
112
113
114
115
116
117
118
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
FRZ MODE 0000
SEL 0001
0002
REC INH 0000
0001
REC INH 0000
LAMP 0001
EJECT SW 0000
INH 0001
EJECT LAMP 0000
0001
M CASSTT 0000
INH 0001
SD MODE 0000
INH 0001
– 75 –
This selects the output picture in the STANDBY OFF mode
DIS
established from the playback picture and the EJECT mode.
STBOFF
SOF&EJ 0: The video output is muted.
1: The picture being played back is frozen and output in the
STANDBY OFF mode only.
2: The picture being played back is frozen and output in the
STANDBY OFF mode and EJECT mode.
<Notes>
• The status when the picture is frozen complies with what has
been selected for the setup menu item No.604 (FREEZE
SEL) setting.
• In the EJECT mode, the frozen picture is output only when 1
(BLACK) or 2 (GRAY) has been selected as the setup menu
item No.106 (EJECT EE SEL) setting.
• When transferred to EJECT mode, FREEZE will be forcibly
canceled in case of change in output format of HD serial
output.
OFF This selects whether to allow or inhibit recording on the
cassette tape.
ON
0: Recording on the tape is allowed when its accidental
erasure prevention tab has been set to the recording
enable position.
1: Recording on the tape is inhibited.
LIGHT This selects whether to cause the REC INHIBIT lamp to flash
or light up when the cassette's tab has been set to the
FLASH
recording inhibit position.
0: The lamp lights.
1: The lamp flashes. (The lamp flashes at a frequency of
approximately once a second.)
<Note>
When "1" (ON) has been selected as the setup menu item
No.113 (REC INH) setting, the REC INHIBIT lamp lights all the
time regardless of this setting.
This selects whether to enable or disable the operation of the
REC
OFF eject button on the front panel.
0: The button's operation is inhibited in the recording mode.
1: The button can be operated in any mode.
This selects whether EJECT lamp is kept lighting or turned off
MODE1
in a state of cassette out.
MODE2
0: EJECT lamp is kept lighting.
1: EJECT lamp is turned off.
It selects inhibit/permit of recording onto M cassette tape.
OFF
ON 0: Recording onto M cassette tape is possible.
1: Recording onto M cassette tape is inhibited.
<Note>
With 0 (OFF) selected, the status of inhibit/permit of recording
onto cassette tape depends on the setting of setup menu
No.113 (REC INH).
OFF This selects inhibit/permit of recording in DVCPRO50 and
ON DVCPRO format mode.
0: Recording onto cassette tape is possible.
1: Recording onto cassette tape is inhibited.
<Notes>
• With 0 (OFF) selected, the status of inhibit/permit of
recording onto cassette tape depends on the setting of setup
menu No.113 (REC INH).
• The recording format complies with the setup menu No.020
(SYS FORMAT) setting.
Description