Panasonic AJ-HD150P Operating Instructions Manual page 57

Variable memory function
Variable memory function
Variable memory mode selection
In <Expansion mode selection> status with MODE/SEL button g pressed, variable mode can be
selected.
When EXIT button h is pressed, variable mode is canceled and changed to normal mode.
Outline
The unit is provided with two variable memory functions as follows. These functions can be used in
variable memory mode.
• Variable memory playback: The tape is played back in VAR mode within a specific range, and the
• Variable memory editing:
Variable memory playback operation procedure
Variable memory playback operation can be performed according to the following procedure in variable
memory mode.
1
2
3
4
5
6
<Notes>
• After passing the IN point, the tape is played back reproducing the content of memory and keeps
running at the final speed of the content until STOP button > is pressed.
• The content stored in the memory will be cleared in a mode other than the variable memory mode.
Also, the memory will be cleared with power switch 1 turned OFF.
change in speed is stored in the memory. The tape can be played back
at the memorized speed.
Using the unit as a controller (deck to deck mode recorder) to control
the playback speed of the player, editing can be performed in speed
variable mode.
Register IN point by using SET button T and IN button T.
It is not needed to set OUT point for variable memory playback.
Set the initial speed (– 1.0 to + 1.0) by the search dial P while pressing SET button T.
Simultaneously pressing both SET button T and PREVIEW/REVIEW button S results
in automatic profiling, then the tape is played back at the set initial speed up to the IN
point.
After passing the IN point, turn the search dial P to memorize the playback speed.
Press STOP button > to stop the tape.
When PREVIEW/REVIEW button S is pressed, variable memory playback is per-
formed at the memorized speed.
– 57 –