Panasonic AJ-HD150P Operating Instructions Manual page 88

Setup menus
USER menu
<VIDEO>
No.
670
671
672
673
674
675
676
677
The underline on the setting item denotes the initial setting.
1
* : With the SD output (SD tape playback or down-conversion output)
2
* : With the HD output (HD tape playback or up-conversion output)
(continued)
Item Setting
Superimposed Superimposed
No.
display display
CC (F1) 0000
1
BLANK* 0001
CC (F2) 0000
1
BLANK* 0001
VO SETUP 0000
1
(SD)* 0001
0002
0003
EDH 0000
1
(SD)* 0001
ESR MODE 0000
1
(SD)* 0001
CCR MODE 0000
1
(SD)* 0001
SDI 0000
1
INDEX O* 0001
VO SETUP 0000
2
(HD)* 0001
0002
0003
– 88 –
BLANK For selecting whether to turn the closed caption signals in the
THRU first field ON or OFF.
0: The signals are forcibly blanked.
1: The signals are not blanked.
BLANK For selecting whether to turn the closed caption signals in the
THRU second field ON or OFF.
0: The signals are forcibly blanked.
1: The signals are not blanked.
THRU This selects the composite output signal in SD mode.
ADD22L 0: The signal is output with no setup added.
ADD21L 1: The signal is output from 22 line with a 7.5% setup added.
ADD20L 2: The signal is output from 21 line with a 7.5% setup added.
3: The signal is output from 20 line with a 7.5% setup added.
This selects whether EDH is to be superimposed onto
OFF
SERIAL OUT.
ON
0: EDH is not superimposed.
1: EDH is superimposed.
OFF This selects the edge subcarrier reduction (ESR) operation
AUTO mode in the playback circuitry.
0: ESR is forcibly set to OFF.
1: ESR is automatically set to ON or OFF depending on the
VTR operation.
OFF This selects the processing for cross color during playback.
ON 0: The cross color is output as is.
1: The cross color can be reduced.
OFF For selecting whether the VIDEO INDEX signal is to be
ON superimposed onto the SD SDI output.
0: The VIDEO INDEX signal is not superimposed onto the SD
SDI output.
1: The VIDEO INDEX signal is superimposed onto the SD
SDI output.
THRU This selects the composite output signal in HD mode.
ADD22L 0: The signal is output with no setup added.
ADD21L 1: The signal is output from 22 line with a 7.5% setup added.
2: The signal is output from 21 line with a 7.5% setup added.
ADD20L
3: The signal is output from 20 line with a 7.5% setup added.
Description