Panasonic AJ-HD150P Operating Instructions Manual page 19

Operations using the front panel bottom controls
3
4
5
6
Turn the search dial and select the item to be registered.
The cursor (¢) on the menu screen now moves.
∫Example of the menu displayed for registering setup menu items
ASSIGN-MENU BASIC
<USER>
000 P-ROLL TIME
¢
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
004 SYNCHRONIZE
005 SUPER
006 DISPLAY SEL
007 CHARA H-POS
008 CHARA V-POS
∫Example of the menu displayed for registering VTR statuses
ASSIGN-MENU
<STATUS>
000 REC FORMAT
¢
001 REF OUT
002 PB FLD RATE
003 REC FLD RATE
004 HD OUT
005 SD OUT
006 UFC
END
When registering setup menu items: At the position of the item to be registered,
When registering VTR statuses:
The number of the button corresponding to the button that was pressed is now
displayed. When the same button is pressed again, the button number display is
released.
To register more items, repeat steps 3 and 4.
Press the SAVE/EXIT button.
The registered information is now saved in the memory. (When more than one item
has been registered, the information will be stored in sequence starting with the lowest
item number.)
To return the registered information to the state prior to registration, press the STOP
button.
N0.000 - 1---
1---
-2--
--3-
----
----
----
----
----
----
N0.000 - 1---
1---
-2--
--3-
----
----
----
----
----
select the PROG MENU button (1, 2, 3 or 4) in
which the information is to be registered, and
press it.
At the position of the item to be registered,
select the STATUS button (1, 2 or 3) in which
the information is to be registered, and press it.
– 19 –