Panasonic AJ-HD150P Operating Instructions Manual page 63

Setup menus
Lock mode can be set to protect the settings in the system files and user files (USER2 –
USER5). Settings can no longer be changed when this mode is set.
To set and release the lock mode for the system files and user files use setup item No. 30
(MENU LOCK) and setup menu item No. A03 (MENU LOCK), respectively.
Setting and releasing the lock mode.
1
2
3
4
5
<Note>
• The lock mode cannot be set for the USER1 file settings.
• Even if the RESET button is pressed, the files which has been set to the lock mode cannot
be reset to the factory settings.
Press the MENU button.
While holding down the STAND BY button, press the REW or FF button, and select the
file for which the lock mode is to be set or released.
Turn the search dial and move the cursor (
(MENU LOCK) or setup menu item No. A03 (MENU LOCK) for the system or user file.
While holding down the search button, turn the search dial and select lock mode setting
or release.
To set the lock: Select the 0001 (ON) setting.
To release the lock: Select the 0000 (OFF) setting.
When the lock has been set, "LOCKED" flashes on the menu screen.
SETUP-MENU
<USER2>
000 P–ROLL TIME
¢
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
004 SYNCHRONIZE
005 SUPER
006 DISPLAY SEL
007 CHARA H-POS
008 CHARA V-POS
Press the SET button. The setting is now stored in the memory.
) on the menu screen to setup item No. 30
¢
LOCKED
No.800 – 0005
5s
ST&EJ
±12h
OFF
OFF
ON
T&STA
6
23
– 63 –