Specifications - Panasonic AJ-HD150P Operating Instructions Manual

Specifications

GENERAL
Power supply: AC 120 V, 50 – 60 Hz
Power consumption: 230 W
Operating ambient temperature:
Operating ambient humidity:
Weight:
Dimensions (W × H × D):
Recording format:
Recording video signal:
Recording audio signal:
Recording tracks:
Tape speed:
Recording time:
Tape:
FF/REW time:
Search speed:
Digital slow:
Editing accuracy:
Tape timer accuracy:
Servo lock time:
Loading time:
Audio split editing:
VIDEO
Sampling frequencies:
Quantizing:
Video compression method:
Video compression rate:
Error correction:
Video recording bit rate:
Video input connector
HD serial digital input:
HD reference input:
SD reference input:
SDTI input (option):
Video Output Connector
HD serial digital output:
Serial digital component output:
HD reference output:
SD reference output:
Analog composite output:
SDTI output (option):
Video Signal Adjustment
HD SDI Y output gain:
HD SDI P output gain:
B
HD SDI P output gain:
R
HD SDI Y black level:
41°F to 104°F (5°C to 40°C)
10% to 90% (no condensation)
44 lbs (20 kg)
16-3/4˝ (max. 17-3/16˝ ) × 6-15/16˝ × 17-11/16˝
(Not including the support legs, connectors, JOG dial and fan)
DVCPRO HD
1080i/720p, 59.94 Hz/60 Hz selectable
48 kHz, 16 bits, 8 channels
Digital video/audio: helical track
The time code is recorded in the sub-code area.
Cue track: 1 track
Control track: 1 track
135.28 mm/sec
46 minutes (using the AJ-HP46LP)
32 minutes (using the AJ-HP32LP)
Metal tape
Approx. 1 min (with AJ-HP46LP)
±50× speed (color)
Plus direction: 1× speed
Minus direction: –1× speed
±0 frames (using the time code)
±1 frame (using the continuous CTL signal)
Less than 0.3 sec (standby ON)
Approx. 3 sec
YES
Y: 74.25 MHz, P /P : 37.125 MHz
B R
8 bits
DCT + variable length code
1/6.7
Reed-Solomon product code
100 Mbps
BNC×1, complies with SMPTE 292M standard
BNC×2, loop-through, 75Ω on/off
BNC×2, loop-through, 75Ω on/off
BNC×1, complies with SMPTE 305M/321M standard
BNC×3, complies with SMPTE 292M standard
OUT3 (superimpose on/off)
BNC×3, complies with SMPTE 259M-C/294M standard,
OUT3 (superimpose on/off)
BNC×1
BNC×1
BNC×3, video 1, video 2 (WFM OUT), video 3 (superimpose on/off)
Output during SD playback or when the down-converter is installed
BNC×1, complies with SMPTE 305M/321M standard
–¶ to +3 dB
–¶ to +3 dB
–¶ to +3 dB
±10%
– 119 –