Kenwood FP720 Series Instructions Manual page 10

mini processor bowl
Use the mini processor bowl
to chop herbs and process
small quantities of
ingredients e.g. meat, onion,
nuts, mayonnaise,
vegetables, purées, sauces
and baby food.
mini processor knife blade
mini processor bowl
to use the mini
processor bowl
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the mini processor bowl -
ensuring the ribs on the
inside of the mini bowl
chimney align with the slots
in the main bowl chimney
.
3 Place the knife blade over
the drive shaft .
4 Add the ingredients to be
processed.
5 Fit the lid and switch on.
safety
G Never remove the lid until the knife blade has completely
stopped.
G The knife blade is very sharp - always handle with care.
important
Don't process spices – they may damage the plastic.
G
Don't process hard food such as coffee beans, ice cubes or
G
chocolate – they may damage the blade.
hints
Herbs are best chopped when clean and dry.
G
Always add a little liquid when blending cooked ingredients
G
to make baby food.
Cut foods such as meat, bread, vegetables into cubes
G
approximately 1-2 cm ( 1 ⁄
2
When making mayonnaise add the oil down the feed tube.
G
m u
lt i
p r
o
– 3 ⁄ in) before processing.
4
care & cleaning
Always switch off and unplug before cleaning.
G
Handle the blades and cutting discs with care - they are
G
extremely sharp.
Some foods may discolour the plastic. This is perfectly
G
normal and won't harm the plastic or affect the flavour of
your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock
G
area is clear of food debris.
Store excess cord in the
G
storage area at the back of the
machine .
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the seals.
4 Don't touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling
G
them free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry.
G
Do not immerse the drive head in water.
all other parts
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack of your
G
dishwasher. A short low temperature programme is
recommended.
8