Operation Mode - Daikin BRC1E62 Operation Manual

1. Operation Mode

• Displays the present operation mode,
"Cool", "Heat", "Vent", "Fan", "Dry" or
"Auto".
2. Airflow Rate (Air Volume/Fan
Speed)
• Displays the airflow rate that is set for the
indoor unit.
• The airflow rate will not be displayed if the
indoor unit does not have airflow rate
control function.
3. Airflow Direction "
• Displayed when the airflow direction and
swing are set (Refer to page 13).
• This icon is not displayed if the indoor unit
does not have a function to set airflow
directions.
4. Set/Setback Temperature display
• When the air conditioner is turned on, "Set
to" indicates the set temperatures that are
set for the air conditioner.
• When the air conditioner is turned off,
"Setback" indicates the setback
temperatures that are set for the air
conditioner.
5. Defrost/Hot start "
(Refer to page 14.)
Displays if the Defrost/Hot start operation is active.
If ventilating operation "
• Displayed when a Heat Reclaim Ventilator
is connected.
For details, refer to the Operation Manual
of the Heat Reclaim Ventilator.
6. Message
The following messages are displayed.
"This function not available."
• Displayed for a few seconds when an
operation button is pressed and the indoor
unit does not have the corresponding
function.
4PWEN71265-1A_01_OM_ENGLISH.indb 8
• If a number of indoor units are in operation,
"Error: Push Menu button"
"Warning: Push Menu button"
• Displayed if an error or warning is detected
"Quick Start" (Split system only)
• Displayed if the quick cooling/heating
"
"Time to clean filter"
"Time to clean element"
"Time to clean filter and element"
• Displayed when the time to clean the filter
7. Ventilation/Air Purifying
• Displayed when a Heat Reclaim Ventilator
• Ventilation Mode icon."
• Air purifying icon "
"
8. Key Locked "
" is displayed:
(Refer to page 21.)
• Displayed when the key lock is set.
9. Timer Enabled "
(Refer to page 40 and 47.)
• Displayed if the Schedule timer or
the message will appear only if none of the
indoor units is provided with the
corresponding function, i.e., the message
will not appear if at least one of the indoor
units is provided with the corresponding
function.
(Refer to page 61).
function is turned on (Refer to page 30).
or element has come (Refer to
page 59).
is connected.
These icons indicate the current ventilation
mode (Heat Reclaim Ventilator only)
(AUTOMATIC, ENERGY RECLAIM
VENTILATION, BYPASS).
"
This icon indicates that the Air Purifying
unit (optional accessory) is in operation.
"
"
OFF timer is enabled.
"
8
1/29/2013 6:40:13 PM