Daikin BRC1E62 Operation Manual page 13

2
3
Cool
Set to
4
Cool
Set to
Air volume/direction
Air volume Direction
Low
Return Return Setting Setting
5
Low
Auto
A
4PWEN71265-1A_01_OM_ENGLISH.indb 12
• Press ON/OFF button.
The Operation lamp (green) will be lit and the
system will start operating.
• The set temperature will increase by
1°C when " " button is pressed and decrease by
1°C when " " button is pressed.
28
Cool
°C
* No temperature settings are possible while operating in Fan
mode.
Airflow Rate (Air Volume/Fan Speed) or
Airflow Direction Setting
• Press Airflow setting button.
28
Cool
°C
• To select Air volume or Direction setting, press
" " buttons.
Position 0
<Airflow Rate Adjustment>
Medium
• With Air volume selected, set the desired airflow
rate from low
High
" " buttons.
* Depending on the type of indoor unit, the
adjustment levels may be two levels of
High
or three levels of
* For equipment protection purposes, the indoor
unit may control airflow rate automatically.
* According to the room temperature, the indoor
unit may control airflow rate automatically.
The fan may stop operating, which, however, is
not a failure.
* It may take time until a change of the airflow rate
is completed.
* In setting, the airflow rate is adjusted
Auto
automatically according to set temperature and
room temperature. In Fan mode, the airflow rate
setting is always at High.
High
, Medium , or
Auto
low Medium
, , and
using the
low
and
High
.
12
1/29/2013 6:40:15 PM