Daikin BRC1E62 Operation Manual page 39

„Sensing Sensor (stop)
This function cannot be used at the time of group control.
In case of the simultaneous operation system, the system is controlled by the sensing sensor
mounted in the master indoor unit.
Operation
1
Energy Saving Options
Energy Saving list
Setpoint range set
Set back condition
Sensing Sensor (low)
Sensing Sensor (stop)
Setpoint Auto Reset
Return Setting
2
Sensing Sensor (Stop)
Absent stop on/off:
Absent stop set time: 1 hours
Return Setting
3
Sensing Sensor (stop)
Save the settings?
Yes
Return Setting
4PWEN71265-1A_01_OM_ENGLISH.indb 38
• Display the Energy Saving Options screen (Refer
2/2 1/2
to page 34).
• Press "
select Sensing Sensor (stop)
Press Menu/Enter button to display the Sensing
Sensor (stop) screen.
• Press "
2/2
operation when the sensor detects the absence.
OFF
• Press "
Press Menu/Enter button after selecting the item.
The confirmation screen will appear.
• Press "
Press Menu/Enter button to confirm the settings
and return to the Basic screen.
No
" buttons to
.
" buttons to set the saving energy
" buttons to move the cursor.
Yes
" buttons to select .
38
1/29/2013 6:40:28 PM