Daikin BRC1E62 Operation Manual page 38

„Sensing Sensor (low)
This function cannot be used at the time of group control.
In case of the simultaneous operation system, the system is controlled by the sensing sensor
mounted in the master indoor unit.
Operation
1
Energy Saving Options
Energy Saving list
Setpoint range set
Set back condition
Sensing Sensor (low)
Sensing Sensor (stop)
Setpoint Auto Reset
Return Setting
2
Sensing Sensor (low)
Adjust temp. cool:
Adjust time cool: 30 min
Limit cool temp.: 30°C
Adjust temp. heat: 1.0°C
Adjust time heat: 60 min
Limit heat temp.: 15°C
Return Setting
3
Sensing Sensor (low)
Save the settings?
Yes
Return Setting
37
4PWEN71265-1A_01_OM_ENGLISH.indb 37
• Display the Energy Saving Options screen (Refer
2/2 1/2
to page 34).
• Press "
Sensing Sensor (low)
Press Menu/Enter button to display the Sensing
Sensor (low) screen.
• Press "
1.0°C
of saving energy operation when the sensor
detects the absence.
• Press "
Press Menu/Enter button after selecting the item.
The confirmation screen will appear.
(Example)
Adjust temp cool: 1.0°C
Adjust time cool : 30 min
Limit cool temp : 30°C
• If it is determined that there is no person in the
room by sensor during Cooling Operation, the set
temperature will automatically shift by 1°C every
30 minutes until the set temperature is 30°C.
(On Basic screen, set temperature does not
change.)
• Press "
Press Menu/Enter button to confirm the settings
and return to the Basic screen.
No
" buttons to select
.
" buttons to change the setting value
" buttons to move the cursor.
Yes
" buttons to select .
1/29/2013 6:40:27 PM