Omnitronic PAM-500 MK2 User Manual page 24

• Channel 1 has priority:
announcement via this microphone channel the
level of the other signal sources is attenuated
thereby increasing
announcement.
22
Inputs LINE 1-4
Balanced 6.3 mm jacks for the mono input channels
1-4 to connect units with line level (e. g. instrument
amplifiers and effect units).
23 Input jack STEREO AUX RETURN
To feed in an effect signal.
24 USB port with LED
USB port for connecting a USB storage device. The
LED STATE lights when a USB device is inserted
and flashes when playback is started.
30
Main inserts SEND/RETURN
To insert additional units for processing the sound
in the master signal way. The SEND jacks can also
be used as a master signal output, e. g. to connect
another amplifier.
31 Outputs MAIN LEFT/MAIN
• MAIN STEREO mode: To connect the speaker
system for the left channel of the master signal.
• MAIN MONITOR mode: For the main signal.
The two jacks are connected to each other in
parallel.
32 Outputs MAIN RIGHT/MONITOR
• MAIN STEREO mode: To connect the speaker
system for the right channel of the master signal.
• MAIN MONITOR mode: For the monitor signal.
The two jacks are connected to each other in
parallel.
33 Output jack REV/AUX SEND
To connect an effect unit in parallel to the internal
effect; provides the signal (mono, unbalanced)
adjusted via the controls AUX.
In case of
the intelligibility of
an
25 Button EQ
For selecting equalizer settings.
the
26 Buttons [
For selecting titles (
27 Button [RII] PLAY/PAUSE
For switching between play and pause.
28 Volume control for the MP3 player
29 On/off switch with power indicator for the
MP3 player
34 Output FOOT SWITCH
6.3 mm jack for a foot switch to switch on and off
the internal echo effect.
35 Output jacks RECORD OUTPUT
Stereo RCA output of the master signal for
connecting a recording unit. The recording level is
independent of the output control LEFT/MAIN and
RIGHT/MONITOR.
36 On/off switch for the PA system
37 Power indicator
38 Signal indictors L/R
39 LED PROTECT
Lights up with the protective circuit activated.
40 Clip indicator
24/34
] PRE and [ ] NEXT
: previous title/ : next title).
00073641.DOC, Version 1.0