Omnitronic PAM-500 MK2 User Manual page 23

12 Control DELAY
To adjust the delay time for the internal echo effect.
13 Control REPEAT
To adjust the number of repeats for the internal
echo effect.
4.3 Master Section
16 Volume control LEFT/MAIN
• MAIN STEREO mode: For the left channel of the
master signal.
• MAIN/MONITOR mode: For the main signal.
17 Volume control RIGHT/MONITOR
• MAIN STEREO mode: For the right channel of the
master signal.
• MAIN/MONITOR mode: For the monitor signal.
20 Inputs STEREO 1 and STEREO 2
6.3 mm stereo jacks and stereo RCA jacks for the
stereo channels 5/6 and 7/8 to connect a stereo
signal source with line level (e. g. CD player and
keyboard).
14 Control AUX
To adjust the total volume of the internal effect.
15 Control PAN
Defines the position of the effect signal in the stereo
panorama for the internal echo effect.
18 Operating mode switch MODE
• MAIN STEREO mode: The stereo master signal
is available at the speaker outputs.
• MAIN/MONITOR mode: At the speaker output
MAIN LEFT/MAIN, the mono master signal is
available; at the output MAIN RIGHT/MONITOR,
the monitor signal mixed via the controls AUX.
19 Equalizer
10-band equalizer for the master signal.
21 Inputs MIC 1-4
• Balanced XLR jacks for the mono input channels
1-4 to connect dynamic microphones.
23/34 00073641.DOC, Version 1.0