Watchguard DVR4EONPACK Quick Installation Manual page 9

Video search
Press "MENU" on the DVR front panel to bring up the main menu. Select "PLAYBACK" to as shown
below.
To playback, first select the corresponding camera channel then choose the DATE and click "SEARCH".
Next select the TIME and press "PLAY". This will begin playing the selected time.
Alternatively you can select the corresponding camera channel then choose the DATE and click
"SEARCH" to view the record state of this date, as shown below:
Month: displaying the record information of every day in the current month. A green block indicates
normal recording, a red block indicates alarm recording, and the background color indicates no
recording. Click a date on this bar to search the record information of every hour of that day. The
search results will be visualized in the "Day" bar below.
Date: displaying the recording hours of the current day. Each lattice represents 1hr, and one recording
segment is 0.5hr. The presentation of the record state is the same as above. Click a 0.5hr segment of a
day directly to enter the record playback of this segment.
8