Enabling Of Boot Bios Of Cna - Fujitsu PRIMEQUEST 2000 Series Configuration Manual
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
"Emulex OneConnect FCoE BIOS Utility" screen is displayed to set parameters of FCoE Boot.
4.2. Enabling of Boot BIOS of CNA
To enable FCoE Boot of the CNA, select [Enable/Disable Boot from SAN] in main menu of Emulex OneConnect
FCoE BIOS Utility screen, and press <Enter> key.
Copyright 2016 FUJITSU LIMITED
Figure 4-3
Figure 4-4
14
CA92344-0966-01
Advertisement
Table of Contents
