Table of Contents
Advertisement
Advanced Configuration
When other changes are required, the web-based interface (Maestro) should be used.
1.
Connect your computer directly to the ZeeVee modulator using a standard Ethernet cable
(cross-over cable not required), or connect the unit to any LAN that has a DHCP server.
NOTE: Macs will require connection via Switch or LAN, they will not support direct-connect
to the Ethernet port.
2.
After a few moments, an IP address will appear at the top of the front panel display.
3.
Using any web browser (Chrome or Firefox preferred),
go to the IP address to launch Maestro, the
configuration tool.
4.
You will be directed to a login page:
User Name: admin
Default Password: admin
The User Name will always be "admin." The default
password is "admin" but it can be changed in the
configuration tool.
NOTE: Login is case-sensitive.
5.
Tabs across the top allow for different configuration
actions.
Click on "Channel Plan" to set the RF number,
channel names, video source, etc.
NOTE: RF numbers are entered in pairs based
on frequency.
6.
Click "Apply" to save your changes. Settings are
stored in the unit and not lost on power-down.
HDbridge 2000-EU Series Modulator
Maestro Channel Plan Screen
For questions and more complex configuration settings,
go to our website for additional information:
http://www.zeevee.com/support/configuration/hdbridge2000
Maestro Login Screen
Maestro Status Screen
Click Apply to save
your changes.
Page 7 of 8
Advertisement
Table of Contents
