Download Print this page

ZeeVee HDb2540 Quick Start Manual

Hdbridge2000 series

Advertisement

Quick Links

ZeeVee Quick Start Guide
Welcome to ZeeVee!
All ZeeVee products convert your video source to a digital
cable channel and broadcast it over coax to all your HDTVs.
This guide walks you through basic setup for ZeeVee HD
modulators approved for use with the DIRECTV H25 Receiver.
If you run into any problems during installation, feel free to
contact Tech Support at +1 (877) 4-ZEEVEE (1.877.493.3833).
What's in the box:
ZeeVee Modulator
AC Power Cord
H25 Audio/Video Cables x4
www.zeevee.com
Basic Installation
RF Output
+45 dBMV
Factory default settings allow ZeeVee modulators to broadcast up to four HD
sources on RF channels 2, 3, 5 and 6 for reception at connected HDTVs.
1.
Connect the power supply and apply AC power.
2.
Using the A/V cable, connect the mini-DIN connector to the A/V Output
on your H25 Receiver.
3.
Connect the Composite Video connector on the A/V cable to the Video
Out port for closed captions only.
4.
Connect the RF Output to your RF network. Default output power can be
changed using Maestro, the web-based configuration utility.
NOTE: Default output power of HDbridge2000 is +45dBmV. Do not
connect directly to TV or you may damage the TV.
5.
Set the RF input on the TV to Cable Mode (not Air or Antenna).
6.
Tune HDTVs to cable channels
(see Table 1).
NOTE: Many TVs require a full
channel scan to find the channels.
H25 A/V cables are included with this
product for use with DirecTV H25 receivers.
Standard Hydra A/V cables and VGA-DIN
cables for use with other video sources
Quick Start Guide
can be purchased separately from your
distributor.
+
H25 ReceiveRs
R e c e i v e R - l e s s H D
Back of H25 Receiver
Closed Caption
only
A/V cable
AC Power
Back of HDb2540
Table 1
AV Input
RF #
AV Input 1
2
AV Input 2
3
AV Input 3
5
AV Input 4
6
HDb2540
Model Number
Color Display
Coax Output
HDbridge 2000 Default
+45dBmV Power - do
not connect directly to
HDTVs.
Audio/Video Inputs
for up to 4 sources
10/100 LAN Port
10/100 LAN Port
A/C Power Input
H25 A/V Cable
DIN Connector to ZeeVee
Mini-DIN Connector to
DirecTV
Composite Video Connector
for Closed Captions only
H25 A/V cables are included with this product for use with DirecTV H25 receivers.
Standard Hydra AV cables and VGA-DIN cables for use with other video sources can
HDTV
Channel
be purchased separately from your distributor.
2.1
3.1
5.1
6.1
Name and description of the unit.
Displays configuration and system status.
Up to 2 paired, frequency-agile QAM RF
CATV output channels for up to 4 video
sources.
Output power can be set between +25 to
+45 dBmV using the front panel or the
Maestro web interface.
Video: Component
Closed Captioning: Composite
Audio: Digital, Analog
Configuration and remote management
For simplified wiring and deployment
100-240VAC / 50-60Hz
www.zeevee.com

Advertisement

loading

Summary of Contents for ZeeVee HDb2540

  • Page 1 +45 dBmV using the front panel or the HDTVs. Factory default settings allow ZeeVee modulators to broadcast up to four HD Maestro web interface. sources on RF channels 2, 3, 5 and 6 for reception at connected HDTVs.
  • Page 2: General Information

    (HDbridge2000 MODEL NUMBERS HDB2540-NA, HDB2520-NA), please contact ZeeVee directly 168-174 348-354 528-534 708-714 Except for: by calling ZeeVee Support at +1 (877) 493-3833. If it is determined that the product needs to be re- Channel 5, 174-180 354-360 534-540 714-720 turned for service or exchange, you will receive a Return Material Authorization (“RMA”) number.

This manual is also suitable for:

Hdb2520