Front and Back Panels Basic Installation Composite Analog Composite Video Source Audio Video Video Source RF Output +45 dBmV Back of HDb2312 Modulator Coax cable connects Ethernet to network or to coax network Optional Delay Matched directly to computer...
You can set the RF broadcast channels using the 502-510 662-670 822-830 map. For instance, if you enter RF front panel controls. In many cases, your ZeeVee Channel # “21” then RF Channel modulator will require only these configurations. 510-518 670-678 830-838 # “22”...
THE AV SOURCE TAB Connecting with Maestro Allows you to specify audio 1. Connect your computer directly to the ZeeVee modulator and video sources as well as using a standard Ethernet cable (not a cross-over cable) or other configuration options for connect the unit and your computer to any LAN that has a the sources.
• Any ZeeVee Equipment that has been modified to you. This warranty gives you specific legal rights Feed the audio to the ZeeVee unit and send it to the HDTV with the video. Then take the audio out from an HDTV or ...
Chromium, Cadmium, Polybromated Biphenyls, Polybromated Diphenyl Ether, Pentabromodiphenyl +44 1494 956677 Phone Ether, Octabromodiphenyl Ether, Decabromodiphenyl Ether. EMEAsales@zeevee.com Stephen Metzger Vice President of Engineering Direct all specific inquires to the ZeeVee, Inc. Engineering Department September 2014 Proudly designed and built in the USA...
Need help?
Do you have a question about the HDbridge 2312 and is the answer not in the manual?
Questions and answers