Event
Standby not enabled
Inactive
2.4.4
Error Codes
Event
POST failed (critical error)
Software initialization failed
Country code not configured.
Note: During first time setup, the LEDs
will remain in this state until the country
code is configured.
No access ports have been adopted
Primary inactive or failed
Top LED
Blue blinking
Amber blinking
Top LED
Red blinking
Amber solid
Amber solid
Blue blinking
Amber blinking
Specifications
Bottom LED
Off
Amber blinking
Bottom LED
Red blinking
Off
Amber blinking
Amber blinking
Blue blinking
5