2
Specifications
2.1 Physical Specifications
Max Power Consumption
Operating Temperature
Operating Humidity
2.2 Power Cord Specifications
A power cord is not supplied with the device. Use only a correctly rated power cord that's
certified, as appropriate, for the country of operation
2.2.1
Power Protection
•
If possible, use a circuit that is dedicated to data processing equipment.
Commercial electrical contractors are familiar with wiring for data processing
equipment and can help with the load balancing of these circuits.
•
Install surge protection. Be sure to use a surge protection device between the
electricity source and the WS5100.
•
Install an Uninterruptible Power Supply (UPS). A UPS provides continuous power
during a power outage. Some UPS devices have integral surge protection. UPS
equipment requires periodic maintenance to ensure reliability. A UPS of the proper
capacity for the data processing equipment must be purchased.
2.3 Cable Requirements
To connect the WS5100 to the LAN and the WLAN, you'll need two Category 6 Ethernet
cables (not supplied), one for each of the two Ethernet ports on the front panel of the
device.
48.1 cm / 18.93 in. (with mounting brackets)
Width
42.9 cm / 16.89 in. (without mounting brackets)
Height
4.39 cm / 1.73 in.
Depth
40.46 cm / 15.93 in.
Weight
6.25 kg / 13.75 lbs.
100 VAC, 50/60 Hz, 3A
240 VAC, 50/60 Hz, 1.5A
10°C - 35°C / 50°F - 95°F
5% - 85% without condensation
.
Specifications
3