Further Configuration Through The Quick Start View - Symbol WS5000 Series Installation Manual

14 WS5000 Series: WS5100 Installation Guide
5

Further Configuration through the Quick Start View

To complete the initial configuration of the WS5100, use the Quick Start View. The
Quick Start View is part of the WS5000 Series applet, a Web-based tool that lets you
configure your WS5100 switch through an intuitive graphical interface. The Quick Start
View portion of the applet is designed to take a factory-fresh switch and bring it up to a
minimal working configuration. For advanced switch configuration, refer to the WS5000
Series System Reference, which you'll find on the product CD.
Using the instructions below, create a WLAN policy and a security policy. You'll then
apply these policies to the WS5100 switch policy. After you've created and applied the
policies, you should be able to adopt and communicate with properly configured mobile
units, as described in "
5.1 Applet Requirements
The WS5000 Series applet is accessed through Internet Explorer version 5.5 using the
SUN JRE (Java Runtime Environment) 1.4.2_04. (Later versions of IE and the SUN JRE
are also supported.) A copy of the SUN JRE is provided with your WS5100 product CD.
To install the JRE, insert the CD, wait for the Flash menu to appear, and then select
Install the SUN JRE
To prepare Internet Explorer to run the WS5000 Series applet:
Open IE's
1.
Tools > Internet Options
Uncheck the following checkboxes:
2.
•
Use HTTP 1.1
•
Java console enabled (requires restart)
•
Java logging enabled
•
JIT compiler for virtual enabled (requires restart)
Verifying the Configuration
.
panel and select the
" on page 22.
tab.
Advanced