Genesis GTS10SB Operator's Manual page 9

Miter Cut -- A cutting operation made with the wood at any angle other than 90 degree
to the blade.
Molding -- A cut which produces a special shape in the work piece, used for joining or
decoration.
Non-Through Cut -- Any cutting operation where the blade does not extend
completely through the thickness of the work piece
Push Block -- A device used to feed the work piece through the saw during narrow
rip type operations where a push stick can not be used. It also helps keep the operator's
hands well away from the blade.
Push Stick -- A device used to feed the work piece through the saw to help keep the
operator's hands well away from the blade.
Rabbet -- A notch in the edge of the work piece.
Resin -- A sticky, sap-based substance that has hardened.
Rip Cut -- A cutting or shaping operation made along the length of the work piece.
Rip Fence -- Adjustable guide used in ripping cuts to keep the work piece parallel to
the saw blade.
RPM -- Revolutions per Minute. The number of turns completed by a spinning object in
one minute
Saw Blade Path -- The area over, under, behind, or in front of the blade. As it applies
to the work piece, that area which will be, or has been, cut by the blade.
9