Introduction; General Information; Type Of Telephone Required; Phone Access Code - ADEMCO 4286 VIP User Manual

General Information

Type of Telephone Required

Phone Access Code

Your installer has assigned a special 2-digit phone code to enable you to access the
security system via a phone. This code consists of a number from 1–9, followed by a
or # .
www.PDF-Zoo.com
Ademco's VIP (VISTA Interactive Phone) Module permits you to
control your security system via a Touch-tone phone (either on
premises or by a call-in when away). With this module you can do the
following:
•
Receive synthesized phone messages regarding your security
system status over the phone
•
Arm and disarm the security system and perform most function
commands using the telephone keypad. Voice comments or
confirmation tones are provided over the phone as confirmation
after any function command is entered
•
Option to have synthesized phone responses routed to an external
speaker
•
Monitor and/or change thermostat settings over phone line
•
Turn certain lights/appliances on and off via the telephone (Relay
Command Mode), if your system includes this feature.
The phone used for phone access must have Touch-tone capability.
An off-premises phone that does not have Touch-tone service and uses
Pulse for dialing may not permit switching to Touch-tone after
dialing; in such a case, system access from that phone will not be
possible.

Introduction

1