Table of Contents
Advertisement
Accessing the Security System
Using an Off-Premises Phone
Step-by-Step Procedure
If the security system
answers the call directly
(even if the system is in
alarm).
You will hear 2 long tones
followed by a "click," and
then the words "HELLO,
ENTER
NOW."
phone code.
6
www.PDF-Zoo.com
The security system can be accessed from any outside Touch-tone
phone, provided remote access has not been turned off. If turned off,
the following words will be heard when accessing your security
system via the phone: "CALL IN TO SYSTEM OFF. "
To access the security system from off-premises, proceed as
follows:
1. Dial the premises phone number.
A
If an answering machine
responds to the call.
Enter your 2-digit phone
code during a pause at the
beginning of, or during a
pause
message. NEVER enter the
phone code after the machine
PHONE
CODE
starts recording.
Enter your 2-digit
2. When you have entered your 2-digit phone code, the words
"ENTER SYSTEM CODE NOW" will be heard.
3. Enter your 4-digit system code. As a safety feature, only up to
three attempts are allowed in which to enter each code (phone
code and system code), after which time the call-in will be aborted.
B
If someone answers the
phone (a family member
for example).
Enter your 2-digit phone
code within the first 20
in
the
outgoing
seconds
Notify that person that you
are about to access the
security system and that
they should hold on for a
few seconds while you enter
your 2-digit phone code.
When you have accessed
the system, that phone*
will disconnect and can be
hung up.
*
same line.
C
of
the
pick-up.
Also all others on the
Advertisement
Table of Contents
