Turning Remote Phone Access On or Off
Remote telephone access to the security system can be turned on and
off via the on-premises phone * (or via the wired keypad), as follows:
#
9
1
Enter: Master 4-digit system code +
+
+
.
A phone response and/or "beeps" will then indicate whether remote
access is on or off, as follows:
"CALL–IN TO SYSTEM ON" (2 beeps) or,
"CALL–IN TO SYSTEM OFF" (1 beep).
To reverse the existing condition (from ON to OFF or from OFF to
ON), simply enter your 4-digit system code +
+
+
again.
#
9
1
* An off-premises phone can be used to turn Remote Access off, but
not to turn it on.
21
www.PDF-Zoo.com