Table of Contents
Advertisement
Remote Access
Chime Mode
Zone Faults
www.PDF-Zoo.com
Annunciations when the system is in the disarmed state are:
"DISARMED, READY TO ARM" or "DISARMED, NOT READY
TO ARM" * .
*
If the message "DISARMED, NOT READY TO ARM" is heard, and
the "Zone Faults" report is not annunciated later (see Zone Faults
below), simply press the
faulted.
If Remote Access has been turned off, the words "CALL-IN TO
SYSTEM OFF" will be annunciated. If Remote Access is on, no
announcement will be made.
If the security system is in the CHIME mode during the status
reporting session and a door or window is opened, a 2-note chime
sound will be heard over the phone.**
** In some systems, chime sounds will not be heard when the system
has been accessed from an outside phone.
If there is a zone fault (example, a door or window open), the word
"FAULT" will be annunciated, followed by a zone descriptor*** (for
example, "UPSTAIRS BEDROOM") and a 2-digit zone number
(zones below 10 will be annunciated with a leading zero). If zone
faults are not annunciated in your system, press
zones that are faulted.
Note: Silent alarms will be annunciated as faults.
*** If programmed by your installer.
System Status Reports (cont'd)
key to hear the particular zones that are
key to hear
17
Advertisement
Table of Contents
