Optional Marble Surround Installation Procedure - RealFlame PYROTECH Installation & Operating Manual

OPTIONAL MARBLE HEARTH AND/OR MARGIN SET
Marble Margin Set Installation Procedure
1.
2.
3.
32
Install Pyrotech without trim.
Install marble up to flange on Pyrotech. Use liquid nails to fix to wall. Marble should look
like the diagram below once it has been installed and before mantelpiece has been
attached.
Once unit is all set up, attach trim. Trim should overlap the marble so that the switches are
accessible.
1190mm
275mm
1810mm
Firebox
(Inbuilt & ZC models only)
270mm
620mm
375mm