Servicing And Maintenance - RealFlame PYROTECH Installation & Operating Manual

SERVICING AND MAINTENANCE

It is
recommended
that you have
your Real Flame
fire serviced
every two years.
This work should
only be carried
out by authorised
licensed
personnel.
20
To follow when servicing,
removing fan or changing
valve or control modules.
IMPORTANT: POWER MUST BE
ISOLATED PRIOR TO CARRYING
OUT THE SERVICE/MAINTENANCE.
SERVICE/MAINTENANCE ONLY TO
BE CARRIED OUT BY AN
AUTHORISED PERSON.
DO NOT MODIFY THIS APPLIANCE
Figure (2) Remove bottom panel by opening
door and pulling back location pin.
Figure (4) Remove glass from its location, be
sure to avoid breakage or damage to the
glass when removing.
Figure (6)
Figure (1) Remove top louvre panel.The top
panel is held by a screw each side.
Figure (3) Remove front safety glass by firstly
removing four dome nuts.
Figure (5) Remove four door studs used to
secure the door.
Figure (7) Remove door carefully to prevent
damage or breaking of glass.