Table of Contents
Advertisement
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O (blinks)
B
N
Warning! Battery
exhausted.
Q (● blinks red)
P
Warning!!
please wait for the
camera to finish
recording.
O
N
Memory card is write
protected.
P
This card cannot be
used.
P
Warning! This card
cannot be read.
P
Card is not formatted.
Format card?
No
Yes
N
Out of memory.
100
Problem
Clock not set.
Battery running low.
Battery exhausted.
Camera cannot focus.
Camera cannot perform
other operations until
recording is complete.
Write-protect switch is in
"lock" position.
Error accessing memory
card.
Memory card has not been
formatted for use in
camera.
Memory card is full.
Cannot copy picture.
Solution
Set clock.
Prepare to replace
batteries.
Replace batteries.
• Refocus.
• Use focus lock.
Wait until message clears
from display automatically
when recording is
complete.
Slide write-protect switch
to "write" position.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
Choose [Yes] and press k
to format card, or turn
camera off and replace
card.
• Choose smaller image
size.
• Delete pictures.
• Insert new memory card.
• Remove memory card
and use internal
memory.
Delete pictures from
destination.
A
81
12, 93
22, 23
22
17
95
16
16
17
67
24, 51,
77
16
17
77
Advertisement
Table of Contents
