Turning Off The Projector; Selecting The Image Source - Epson powerlite home cinema 3010+ User Manual

The power light flashes while the projector warms up. If you don't see a picture, you may
need to change the image source as described on page 20.
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
To prevent children from turning on the projector, you can use the Child Lock feature. See
page 34 for details.
If you'll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 51 for
details.
Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and
is especially dangerous for children.

Turning Off the Projector

1. Turn off any equipment connected to the projector.
2. Press the Ppower button on the projector twice or press the button on the
Standby
remote control and wait for the power light to stop flashing.
Caution: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over
time.

Selecting the Image Source

The source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player,
cable or satellite box, or video game console).
Press the button on the remote control that corresponds to the port to which your
Source
video source is connected.
20
Setting Up the Projector