Selecting Memory Settings And Resetting The Projector; Creating Memory Settings - Epson powerlite home cinema 3010+ User Manual

Once you have finished making your selections for both screens, select
the Source menu and apply these settings.
Note: Certain combinations of sources can't be selected. Invalid input combinations will be
grayed out.
■
Swap Screens
Split Screen Setup > Swap Screens
Select this option to quickly switch the images on the left and right sides of the split
screen display.
■
Audio Source
Split Screen Setup > Audio Source
Use this setting to select which screen's audio you want to hear while in split screen mode.
Note: Select Auto to hear audio from either the largest screen or the screen on the left
(depending on the Screen Size setting).
Selecting Memory Settings and Resetting the
Projector
Your projector comes with 8 memory locations that are reserved for color mode calibration by
installers. In addition, there are 2 memory locations where you can save other customized
settings to obtain the best picture quality for each of your video inputs.
Note: Certain menu options may not be available when Auto is selected as the Color Mode.

Creating Memory Settings

Memory settings can be used to store most of the picture quality settings on page 39 and color
settings on page 40. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
Memory
2. Select
Save Memory
3. Select the memory name you want to use, then press the
settings.
button on the remote control.
.
Execute
button to save your
Enter
Making Detailed Adjustments
to exit
45