Yamaha RIVAGE PM10 Systems Setup Manual page 48

Control I/O characteristics
Terminal
WORD CLOCK
MIDI
USB 1-4
*1
RECORDING
VIDEO OUT
NETWORK [PC]
TO ENGINE IN/OUT
*5
GPI
LAMP 1-4
*1. Supported file formats are WAV and MP3.
*2. CAT5 or higher cables are used for connections.
*3. STP cables are recommended for connections.
*4. CAT5e or higher cables are used for connections.
*5. Input pin
CH 1-7: TTL level (input voltage 0-5 V)
CH 8: Photo coupler (input voltage 0-24 V, low level: 1 V or lower, high level: 5 V or higher)
Output pin
CH 1-7: Open drain output (max. supply voltage 12 V, max. sink current/pin 75 mA)
CH 8: Relay contact (max. 1A/30VDC)
Power supply pin
Output voltage 5 V ±5%, max. output current 600 mA
*6. 4-pin=+12 V, 3-pin=GND; Up to 5 W is supported for lamp rating.
Dimensions (WxHxD), weight
1549 mm × 417 mm × 848 mm (including the rubber feet), 86 kg
Accessories
System Setup Guide, AC power cords ×2, Dust cover, Gooseneck Lamps LA1L ×4
Optional items
Mini-YGDAI card
Fader
Touch-sensitive 100mm motorized faders; resolution +10 dB to –138 dB, –∞ dB (1024 steps)
NC value
Low mode: NC=15 / High mode: NC=25
Measuring position: 30cm horizontally away and vertically up from the unit (front pad),
48 RIVAGE PM10 System Setup Guide
Format
OUT —
IN MIDI
OUT MIDI
USB 2.0 Host
USB 2.0 Host
—
IEEE802.3
—
—
—
Level
TTL/75Ω
—
—
USB
USB
DVI-D
10BASE-T/100BASE-TX
1000BASE-T
—
0 V–12 V
Connector
BNC
DIN 5pin
DIN 5pin
USB A (Female)
USB A (Female)
DVI
*2 *3
etherCON CAT5
*3 *4
etherCON CAT5e
D-SUB (25-pin, female)
*6
XLR-4-31 type