Yamaha RIVAGE PM10 Systems Setup Manual page 19

SCENE MEMORY section
1
3
6
2
4
5
8
7
1 [OVERLAY] key
Switches Overlay on or off.
(This feature will be supported by a future update.)
2 [UNDO] key
Cancels the most recent scene operation of storing,
recalling or updating a scene.
After you cancel the operation by pressing the [UNDO]
key, you can "redo" the canceled operation by pressing
the [UNDO] key again.
3 [UPDATE] key
Updates scene data by overwriting the current scene
(that has been recalled most recently) with the
current mix data.
4 Scene memory display
Indicates scene memory.
5 [PREVIEW] key
Switches Preview mode on or off.
(This feature will be supported by a future update.)
6 [STORE] key
Stores the current scene settings to the selected scene
memory. If you select the existing scene, it will be
overwritten.
7 [INC]/[DEC] keys
Enable you to select the scene number of a scene that
you want to store or recall.
8 [RECALL] key
Enables you to recall a stored scene from scene
memory.
RIVAGE PM10 System Setup Guide 19