Transmission - MASSEY FERGUSON 410 Operators Instruction Book

Transmission

Gearbox types:
Eight-speed gearbox
Eight-speed shuttle gearbox
Gearbox constant mesh gear ratio:
All models
Creep gearbox (if fitted )
Reduction in all gears
Rear axle
410/420/430
Type
Crown wheel and pinion ratio:
410/420/430
Maximum permissible load capacity:
All models
Rear track settings (all at 102 mm (4 in) increments):
Pressed steel wheels:
410/420/430
Foot brakes -
410/420/430 planetary drive
Parking brake
Power take-off (PTO):
Live PTO / Independent PTO (IPTO)
PTO Speed - 410
IPTO Speed - 420/430
Shaft Diameter
No. of splines
Engine to PTO shaft ratio:
MF 410
MF 420/430
Steering:
410/420/430
Pump
Toe-in - two-wheel drive axle
Toe-in - four-wheel drive axle
Steering wheel
Turning circles:
2WD
4WD
410/420/430 - 001 8903 U1
UZEL
Specifications
The eight-speed gearbox, standard or synchromesh,
has eight forward and two reverse speeds. This is
achieved by using a four forward and one reverse
speed gearbox, compounded by an epicyclic unit.
The eight-speed synchromesh shuttle gearbox has
eight forward and eight reverse speeds. The forward
and reverse (shuttle) selection being controlled by a
lever on the instrument panel adjacent to the steering
wheell.
2.7368:1.
4:1
Planety drive.
Normal duty.
5.1428:1 - 7 x 37
3628 kg (7982 lb).
1220 mm (48 in) to 1930 mm (76 in).
Oil immersed mechanical operation, planetary drive
Operates on both rear wheels at the same time
independent of the foot brakes.
Engaged by a lever on the left of the center housing.
540 rpm at 1685 engine rpm.
540 rpm at 1789 engine rpm.
35 mm (1 3/8 in).
6.
3.1176:1
3.3125:1
Hydrostatic power steering.
Tandem.
0 to 5 mm (0 to 3/16 in).
0 to 5 mm (0 to 3/16 in).
Fixed.
6500 mm .
7000 mm .
103