Do you have a question about the 4708 and is the answer not in the manual?
Questions and answers
Wayne Flowers
March 4, 2025
How to operate the lift arms on 3 point hitch? Is there a specific switch in cap that has to be turned on for fenders switches to work?
1 comments:
Mr. Anderson
May 14, 2025
To operate the lift arms on the 3-point hitch of a Massey Ferguson 4708:
1. Use the three-point linkage control lever to raise the rear linkage fully. 2. Ensure the maximum height setting is fully raised. 3. Set the position/draft control to the "position" setting. 4. To hitch an implement, reverse back while viewing the orange pickup hook through the mesh in the PTO guard. 5. Align the pickup hook with the trailer ring. 6. Slowly raise the linkage until the two hooks click into place under the linkage. 7. Once secured, lower the linkage to rest and support the implement.
To unhitch:
1. Raise the linkage. 2. Pull the release catch behind the seat. 3. Lower the linkage to detach the implement.
Need help?
Do you have a question about the 4708 and is the answer not in the manual?
Questions and answers
How to operate the lift arms on 3 point hitch? Is there a specific switch in cap that has to be turned on for fenders switches to work?
To operate the lift arms on the 3-point hitch of a Massey Ferguson 4708:
1. Use the three-point linkage control lever to raise the rear linkage fully.
2. Ensure the maximum height setting is fully raised.
3. Set the position/draft control to the "position" setting.
4. To hitch an implement, reverse back while viewing the orange pickup hook through the mesh in the PTO guard.
5. Align the pickup hook with the trailer ring.
6. Slowly raise the linkage until the two hooks click into place under the linkage.
7. Once secured, lower the linkage to rest and support the implement.
To unhitch:
1. Raise the linkage.
2. Pull the release catch behind the seat.
3. Lower the linkage to detach the implement.
This answer is automatically generated