Clutch Specifications; Transmission Specifications - MASSEY FERGUSON MF2210 Service Manual

Tractor identification and technical specifications

2-4 Clutch specifications

Manufacturer
Type
Dimensions
Material

2-5 Transmission specifications

Manufacturer
Gearbox
Speeds
Type of reduction ranges
Reverse shuttle
Number of speeds
Rear axle
Bevel gear pair
Final reduction
Total reduction ratio
Type of Differential
Differential lock
Rear brakes
Type
Number of friction disks
Friction disk material
Disk diameter
Total braking area
Diameter of braking cylinder
Parking brake
Rear brakes (4WD axle)
Type
Number of friction disks
Friction disk material
Disk diameter
Total braking area
INTRODUCTION
LX (OX)
Single-plate (with hydraulic PTO)
Double-plate (with mechanical PTO)
11" (280 mm.) Single-plate (MF 2210-2225)
11" (245/280 mm.) Double-plate (MF 2210-2225)
12" (304.8 mm.) Single-plate (MF 2235)
12"/11 (304.8/880 mm.) Double-plate (MF 2235)
Gearshift plate with 5 cerametallic plaques
Organic PTO plate
Massey Ferguson
Four synchronized speeds with infinitely meshed
helical gears
Three forward ranges (Slow-Normal-Fast)
Creeper (7.333 reduction).
Synchronized on gearbox input
12 forward and 12 reverse speeds with standard gearbox
15 forward and 15 reverse speeds with optional
24 forward and 24 reverse speeds with creeper
30 forward and 30 reverse speeds with optional gearbox
48/60 forward and 48/60 reverse speeds with Hi-Lo
9/37 with helical toothing, Gleason type (MF 2210)
11/41 with helical toothing, Gleason type (MF 2225-2235)
Straight-tooth type with 10/51 or 11/49 ratios (MF 2210)
or 11/62 ratio (MF 2225-2235)
23.23 or 20.29
With two planetaries
With mechanical or electrohydraulic control,
mechanically engaged
Disengaged by means of the brakes (electrohydraulic control)
Oil cooled multiple-plate type
8 (4 each side)
Graphitized resin
166x110 mm
2
1900 cm
25.4 mm
Mechanical, engaged by a hand lever
Oil colled multiple plate
8 (2 each side)
Graphitized resin
143x91 mm
764.5 cm 2
1 - 9