Nikon MB-D10 User Manual page 18

To ensure proper operation, read this manual
thoroughly before using this product. After
En
reading, be sure to keep it where it can be seen
by all those who use the product.
This symbol indicates that this prod-
uct is to be collected separately.
The following apply only to users in
European countries:
• This product is designated for
separate collection at an appro-
priate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the
local authorities in charge of waste manage-
ment.
2
• The MB-D10 is for use with compatible cameras
only.
• Do not use with batteries and battery holders not
recommended in this manual. The MB-D10 can
not be used with rechargeable EN-EL3a/EN-EL3
Li-ion batteries.
• The MB-D10 can be used with the MS-40 AA
battery holder for the MB-40 multi-power bat-
tery pack, but performance will be impaired and
the number of photographs that can be taken
with a single set of batteries will drop.
• To prevent electrical shorts caused by metal ob-
jects touching the power terminals, replace the
contact cap when the MB-D10 is not in use.
• When a battery holder or the optional BL-3 bat-
tery-chamber cover is removed from the MB-D10,
remove the batteries or place the holder or cover
in the holder case to prevent electrical shorts
caused by contact with other metal objects.
• The memory card access lamp may light up
when the MB-D10 is attached or removed from
the camera, but this is not malfunction.
• Should you notice smoke or an unusual smell
or noise from the battery pack, discontinue use
immediately. After removing the batteries, take
the device to the retailer or a Nikon-authorized
service representative for inspection.
• The MB-D10 is not equipped with a power
switch. Use the camera power switch to turn
the power on or off .