Stop System Scan; Start Auto Scan; Stop Auto Scan - Motorola CM300TM User Manual

D
4
The display shows the current scan status.
G
5
D
6

STOP SYSTEM SCAN

Press the preprogrammed Scan button to stop
System Scan (see page 14).
– or –
D
1
G
2
D
3
The display shows the current scan status.
G
4
D
5
•
28
English
SYS SCAN
to select
H
SCAN ON
or until
to select the current setting.
to enter menu mode.
H
SYS SCAN
or until
SYS SCAN
to select
H
SCAN OFF
or until
to select the current setting.
The Gsymbol disappears from the
display.
Note: Your dealer/programmer can preprogram
your radio when exiting System Scan to
automatically revert to the last scan
channel that had activity on it or to
automatically revert to the channel where
scan was initiated.
START AUTO SCAN G
Auto Scan automatically starts scanning once a
channel with Auto Scan enabled is selected.
G H
or to select a channel that has been
preprogrammed for Auto Scan by your dealer/
programmer.

STOP AUTO SCAN

G H
or to select a channel that has not been
preprogrammed for Auto Scan by your dealer/
programmer.
The Gsymbol disappears from the display.
•