Connecting To Equipment - DGTEC DG-HDPVR5009 User Manual

ASSEMBLY AND PARTS LIST

1.7 Connecting to Equipment

1. Connect your TV antenna cable to the "ANT IN" jack on the back of the PVR using
coaxial RF cable. Make sure the loop cable is connected correctly to activate the
second tuner (see the diagram below)
YPbPr connection
2. Connect the YPbPr output connectors (three RCA connectors - green, red and
blue) for video from the rear panel of the PVR to the COMPONENT IN on your
television matching colour for colour and AUDIO L/R output connectors (two RCA
connectors – red and white) for audio from rear panel of the PVR to the
corresponding audio input of your television.
VGA
3. Connect the VGA cable from the VGA output on the rear panel of the PVR to the
VGA input of your computer and the AUDIO L/R (two RCA connectors – red and
white) connectors on the rear panel of the PVR to the audio input on your
computer.
9