Connecting To Equipment - DGTEC DG-HDPVR320 Instruction Manual

ASSEMBLY AND PARTS LIST

1.7 Connecting to Equipment

1. Connect your TV antenna cable to the "ANT IN" jack on the back of the PVR using
coaxial RF cable. Make sure the loop cable is connected correctly to activate the
second tuner (see the diagram below)
YPbPr connection
2. Connect the YPbPr output connectors (three RCA connectors - green, red and
blue) for video from the rear panel of the PVR to the COMPONENT IN on your
television matching colour for colour and AUDIO L/R output connectors (two RCA
connectors – red and white) for audio from rear panel of the PVR to the
corresponding audio input of your television.
HDMI
High Definition Multimedia Interface (HDMI) provides both high quality digital video
and audio connection in one cable.
3. Connect the HDMI cable from the HDMI output on the rear panel of the PVR to
the corresponding HDMI input of HDTV or Amplifier using HDMI cable for both
Video and Audio connections.
9