System Settings - DGTEC DG-HDPVR5009 User Manual

INSTRUCTIONS
Event
Set the event type here. To have the PVR turn on at the time set select POWER ON,
to have the system record to the Hard Drive during this period select RECORD or to
change to a selected channel at this time select LIVE PLAY.
Channel
Select Channel for this timer event.
REC Duration
Set the number of minutes for this recording.

2.3 System Settings

Press the Right key to select System Settings, press OK the following menu will be
displayed.
< MENU Setting >
In this menu, use the ◄/► keys to change the settings and the ▲/▼keys to select
the item or press EXIT to cancel.
Transparency
This setting controls the OSD transparency level.
Info Timeout
Select the duration of the visibility when the information banner is displayed.
<Video Setting >
Output
You can switch between YPbPr and VGA mode (VGA mode is used when
connected to a PC).
Resolution
display mode (1080i/
You can select the
OutputFreq
You can switch freq between 50Hz and 60Hz (50Hz is the correct setting for
Australian standards).
720p/576p
).
15