Connecting To Equipment - DGTEC DG-HDPVR320 Instruction Manual

ASSEMBLY AND PARTS LIST

1.6 Connecting to Equipment

1. Connect your TV antenna cable to the "ANT IN" jack on the back of the PVR using
coaxial RF cable.
YPbPr connection
2. Connect the YPbPr out connectors and AUDIO L/R out connectors on the back of
the PVR receiver to the COMPONENT IN on your television using RCA-type
cables.
VGA
3. Connect the VGA out connector and AUDIO L/R out connectors on the PVR
receiver to the "A/V IN" connectors and VGA on your Computer Monitor using
computer monitor and RCA-type cables.
After Sales Support TEL：1800 189 941
8