DGTEC DG-HDPVR5009 User Manual page 13

GETTING STARTED
Change screen aspect ratio
Press the ASPECT key to switch screen aspect mode (16:9 full screen, 16:9 Letter
box, 4:3 full screen, 4:3 letter box, 4:3 panscan).
Change TV/Radio mode
Press TV/Radio key to toggle between Digital TV and Digital radio mode.
View program info
1. Press the INFO key on the remote control to display basic information for "NOW"
and "NEXT" programs on that channel.
2. Press the INFO key a second time to display detailed information for the "NOW"
program.
3. Press the INFO key again to display detailed information for the "NEXT" program.
4. Press the INFO or EXIT key on the remote control to exit from the extended
information environment.
Subtitle
Press SUBT key to switch subtitle (Closed Captions) on/off.
NOTE: Not all programs have Closed Captions included.
Teletext service
1. Press TXT key to open a teletext page (if teletext is transmitted).
2. Press TXT key again or press EXIT key to close the teletext.
EPG (Electric Program Guide)
Your PVR provides you with an electronic program guide for up to 8 days of
programs in advance (where available from the broadcaster) which will allow you to
view on a channel by channel basis and tag programs to be recorded to the Hard
Drive.
1. Press EPG key on the remote control to activate the EPG. Use the ▲/▼keys to
scroll up and down to each channel. Program information will be displayed in the
right hand screen panel.
2. Use the ◄/► keys to change dates in the EPG.
3. Use the blue key to enter into the right hand screen panel where the programs are
listed. Use the ▲/▼ keys to move up and down through the programs o that channel
for that day.
4. Press the Yellow key to view detailed information for any highlighted event.
5. Press the Green key to tag the highlighted program for recording, a timer symbol
will appear along side the program name. The event has been added to the timer list.
6. Press the Blue key to return to the channel list.
7. Press EXIT to leave the EPG environment.
12