Replacing Abrasive Disc - PowerTec BD4800 Owner's Manual

Figure 14
3
4

REPLACING ABRASIVE DISC

1. Remove table assembly.
2. Remove disc cover (1) by loosening and removing
five screws (2).
3. Remove old abrasive disc by peeling it from the
aluminum disc. Removng aluminum disc is not
necessary.
4. Clean aluminum disc (3) if necessary. Use mineral
spirits to remove old adhesive residue. Select the de
sired abrasive disc and apply to aluminum disc.
5. Replace disc cover.
Figure 15
3
1
2
2
(Fig. 15)
1
7