Approved Power Tool Attachments; Mounting The Bike Handle - Stihl FS 90 Instruction Manual

English / USA
Approved Power Tool
Attachments
The following STIHL attachments may
be mounted to the basic power tool:
FH
HT
FCS BF
KB
STIHL power tool attachments are
available for converting the single
purpose FS unit into other power tool
combinations.
22
Attachment
1)
BF
2)3)
FCS
1)
FH
2)
HL 0°
1)2)
HL 135°
2)
HT
2)
KB (4601)
2)
KW (4601)
2)
KW (4602)
1)
Barrier bar must be fitted on the
loop handle
2)
Not approved for use with bike-
handled units
3)
It is not necessary to use a shoulder
strap
KW
Application
Cultivator
Power Edger
Power Scythe
Hedge Trimmer
Hedge Trimmer
(adjustable)
Pole Pruner
Bristle Brush
PowerSweep
PowerSweep

Mounting the Bike Handle

Removing Clamp Moldings
: Hold the lower clamp (1) and upper
clamp (2) firmly.
: Release the wing screw (3).
The clamps are loose once the wing
screw has been released. They are
pushed apart by the two springs (4
and 5).
: Pull out the wing screw.
Washer (6) remain at the tommy
screw .
: Separate the clamps.
Springs (4) and (5) remain in the
lower clamp.
FS 90, FS 90 R