Suspend/Hibernation Functions - Panasonic Toughbook CF-37 Series Reference Manual

Suspend/Hibernation Functions

Starting Up Your Computer Quickly
If you want to immediately start up and continue an application after shutting down
your computer, you can do so by using the suspend or hibernation function.
NOTE
With Windows 98, the "Suspend" is called "Standby".
Differences between the suspend and hibernation functions
Function Suspend function
Where data is saved to Memory
Speed Fast
Requires power supply Yes
Setting the Suspend or Hibernation Function
1
Select [Start] - [Settings] - [Control Panel] - [Power Manage-
ment], in [Hibernate] add the check mark for [Enable hiber-
nate Support] and press [Apply].
2
In [Advanced], select [Standby] or [Hibernate] for [When I
press the power button on my computer] and press [OK].
NOTE
The operation of the power switch and the operation of the computer when the
LCD is closed can be set in [Advanced].
Shutting Down Using the Suspend or Hibernation Function
The computer should be set for suspend or hibernation (
dure).
Slide the power switch
(After releasing your finger from the
power switch, do not touch the power
switch, keyboard or mouse while the
computer is entering in the suspend or
hibernation modes.)
*
When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the Setup
Utility ( page 46) or by the key combination Fn + F4 , there will be no beep sound.
Hard disk
(if power is cut, all data is lost)
Hibernation function
Somewhat slow
Power not required to maintain data
see the above proce-
Suspend Mode
or
Hibernation Mode
(To next page)
15