Suspend/Hibernation Functions - Panasonic CF-47 Series Reference Manual

Suspend/Hibernation Functions

Starting Up Your Computer Quickly
If you want to immediately start up and continue an application after shutting down your
computer, you can do so by using the suspend or hibernation function.
Differences between the suspend and hibernation functions
Function Suspend function
Where data is saved to Memory
Speed Fast
Requires power supply Yes
Setting the Suspend or Hibernation Function
[Hibernation] is factory set.
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
press Enter
5
Press F10 , then select [Yes]
Shutting Down Using the Suspend or Hibernation Function
The computer should be set for suspend or hibernation (
Press the sleep switch; at the "beep*" sound, release your finger.
(After releasing your finger from the
sleep switch, do not touch the sleep
switch or the power switch while the
computer is in the suspend or hiberna-
tion modes.)
*
When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the
Setup Utility ( page 30) or by the key combination Fn + F4 , there will be no beep
sound.
(if power is cut, all data are lost)
( page 30)
, select [Power]
, select [Sleep Switch] and press Enter
, select [Suspend] or [Hibernation] and
Hibernation function
Hard disk
Somewhat slow
Power is not required to maintain data
see the above procedure).
Suspend Mode
or
Hibernation Mode
(To next page)
4