Infrared Data Communications
Data Communications
NOTE
Be sure to enable the use of the Infrared Communication Port in the same way for the
computer with which communications will take place. It is possible to confirm whether
infrared communications is possible with another computer by selecting [Status] in
[Start] - [Settings] - [Control Panel] - [Infrared].
The following procedure should be used if the computer with which communications will
take place is using Windows 98.
1
Select [My Computer] - [Infrared Recipient] on both computers
2
Press [Send File] on the computer that will send a file
3
Select the file to be sent and then press [Open] to commence
the sending of the file
It will be sent to the [My Received Files] folder of the receiving computer.
NOTE
Separate application software is necessary for processing at a transfer speed
of 4 Mbps or when communicating with a computer running Windows 98.
42